QB Bushes

QB bushes are used throughout the industry offering convenience and design flexibility. They are precisely machined of quality gray or ductile iron and are installed by tightening several tightening cap screws. QB bushes easily fit over the tapered hub and a tight press can be produced on the shaft by tightening cap screws. The bush is easily remove from the hub by using the pull-up bolts as jack bush in the holes tapped in the rim of bush. All hubs JA through J are drilled for reverse mounting. QB bushes are applied with sprockets, pulleys, sheaves, couplings, unlimited fans, impellers or any which needs to be shaft-mounted.

QB bushes

Home | Back to Bushes and Hubs | Site Map
Tel: 86-10-8795-2546 | Fax: 86-10-8795-2541 | E-Mail "THC"