Taper Adapters

Taper adapter is a taper-bored sleeve with gray cast iron which fits into the straight bore of a hub. The bush simply fits inside the adapter. When tightening the locking screws, adapter is expanded against the hub bore to press the busing tightly upon the shaft. Taper adapter is recommend for use where it is more convenient to straight bore than to drill, tap and taper bore hubs.

Taper adapter

Home | Back to Bushes and Hubs | Site Map
Tel: 86-10-8795-2546 | Fax: 86-10-8795-2541 | E-Mail "THC"