W and WH Weld-on Hubs

Type W and type WH taperbushed bore weld-on hubs are made in accordance with the relevant European standard. Weld-on Hubs are made of steel, drilled, tapped and taper bored to receive standard taper bushes. The extended flange provides a convenient means of welding hubs into fan rotors, steel pulleys, platewheel sprockets, impellers, agitators and many other devices, which must be firmly fastened entirely suitable for use where severe operating conditions are met. Tightening the screws contracts the bore of the bush, thereby locking it to the shaft with the equipment of a press fit. This type of construction eliminates mounting difficulties, it also prevents loosening and wearing happened to the hub during operation.

Type W and type WH weld-on hubs
Size available:
WH1210, WH1610, WH2012, WH2517, WH3020, WH3030, WH3525, WH3535, WH4040, WH4545, WH5050

Home | Back to Bushes and Hubs | Site Map
Tel: 86-10-8795-2546 | Fax: 86-10-8795-2541 | E-Mail "THC"