THC Logo ANSI Standard Double Pitch Transmission Roller Chains

Double Pitch Power Transmission Roller Chains, or Extended Pitch Power Transmission Roller Chains, are dimensionally identical to ANSI Standard Roller Chains of the same strength, except to pitch length, which is twice that of its ANSI standard equivalent ("doubled"). With only one-half the number of pins, bushes, and rollers, double pitch transmission roller chains are lighter and more economical than ANSI Standard Roller Chains, and are ideal for moderate speed driving and transmission applications, particularly when shaft centers are relatively long. Typical application of this type of chains is found in light load drives in agriculture.


ANSI Double Pitch Transmission Roller Chains (Standard Roller)Double Pitch Transmission Roller Chains
Standard Roller Type

ANSI Chain # ISO/DIN Chain # P d1 b1 d2 t T h2 L Lc U.T.S. (kN) Wt. (kg/m)
A2040 208A 25.40 7.92 7.85 3.96 1.52 1.52 12.00 16.60 17.90 13.80 0.42
A2050 210A 31.75 10.16 9.40 5.08 2.00 2.00 15.00 20.50 21.90 21.80 0.70
A2060 212A 38.10 11.91 12.57 5.94 2.40 2.40 18.00 25.30 26.70 31.10 1.00
A2080 216A 50.80 15.88 15.75 7.92 3.20 3.20 23.50 32.70 34.10 55.60 1.76
A2100 220A 63.50 19.05 18.90 9.52 4.00 4.00 30.00 39.60 43.10 86.70 2.55
A2120 224A 76.20 22.23 25.22 11.10 4.90 4.90 35.80 50.00 53.30 124.60 4.06
A2160 228A 101.60 28.58 31.75 14.27 6.40 6.40 48.00 64.10 67.80 222.40 7.02
A2040H 208AH 25.40 7.92 7.85 3.96 2.00 2.00 12.00 18.50 19.40 13.80 0.56
A2050H 210AH 31.75 10.16 9.40 5.08 2.40 2.40 15.00 22.10 23.50 21.80 0.85
A2060H 212AH 38.10 11.91 12.57 5.94 3.20 3.20 18.00 28.50 29.90 31.10 1.44
A2080H 216AH 50.80 15.88 15.75 7.92 4.00 4.00 23.50 35.90 37.30 55.60 2.25
A2100H 220AH 63.50 19.05 18.90 9.52 4.90 4.90 30.00 42.80 46.30 86.70 3.60
A2120H 224AH 76.20 22.23 25.22 11.10 5.60 5.60 35.80 53.60 56.90 124.60 5.12
A2160H 228AH 101.60 28.58 31.75 14.27 7.50 7.50 48.00 67.30 71.00 222.40 7.94

ANSI Double Pitch Transmission Roller Chains (Oversized Roller)
Oversized Roller Type

ANSI Chain # ISO/DIN Chain # P d1 b1 d2 t T h2 L Lc U.T.S. (kN) Wt. (kg/m)
A2042 208AL 25.40 15.88 7.85 3.96 1.52 1.52 12.00 16.60 17.90 13.80 0.76
A2052 210AL 31.75 19.05 9.40 5.08 2.00 2.00 15.00 20.50 21.90 21.80 1.14
A2062 212AL 38.10 22.23 12.57 5.94 2.40 2.40 18.00 25.30 26.70 31.10 1.68
A2082 216AL 50.80 28.58 15.75 7.92 3.20 3.20 23.50 32.70 34.10 55.60 2.79
A2102 220AL 63.50 39.67 18.90 9.52 4.00 4.00 30.00 39.60 43.10 86.70 4.67
A2122 224AL 76.20 44.45 25.22 11.10 4.90 4.90 35.80 50.00 53.30 124.60 6.60
A2162 228AL 101.60 57.15 31.75 14.27 6.40 6.40 48.00 64.10 67.80 222.40 11.59
A2042H 208ALH 25.40 15.88 7.85 3.96 2.00 2.00 12.00 18.50 19.40 13.80 0.90
A2052H 210ALH 31.75 19.05 9.40 5.08 2.40 2.40 15.00 22.10 23.50 21.80 1.29
A2062H 212ALH 38.10 22.23 12.57 5.94 3.20 3.20 18.00 28.50 29.90 31.10 2.12
A2082H 216ALH 50.80 28.58 15.75 7.92 4.00 4.00 23.50 35.90 37.30 55.60 3.28
A2102H 220ALH 63.50 39.67 18.90 9.52 4.90 4.90 30.00 42.80 46.30 86.70 5.72
A2122H 224ALH 76.20 44.45 25.22 11.10 5.60 5.60 35.80 53.60 56.90 124.60 7.66
A2162H 228ALH 101.60 57.15 31.75 14.27 7.50 7.50 48.00 67.30 71.00 222.40 13.00

1) All the products are available in stainless steel, nickel-plated, zinc-plated or copper-plated version on request.
2)Special sprockets are required for these chains since the pitch line differs from that of ANSI standard roller chains. Since special double duty sprockets are used for these chains, every other tooth is engaged with chain when utilizing an odd numbers tooth sprocket. For an even number of sprocket teeth, the sprocket can be manually indexed for greater wear life.


Home | Back to Transmission Drive Chains | Site Map
Tel: 86-10-8795-2546 | Fax: 86-10-8795-2541 | E-Mail "THC"

Read this page before you inquire!

Copyright 1998-2008 by Beijing THC Limited. All rights reserved.